As people have higher and higher requirements for goods packaging, strapping has become a common way of packaging. Customers always have a problem when choosing hot-melt packer. They don't know whether to choose electric packer or pneumatic packer. Now Chuangli Xiaobian explains to big furniture body, hoping to help you.
First of all, the working principle: the electric packer uses lithium battery to drive, and realizes the tightening and welding action through the forward and reverse rotation of the motor; the pneumatic packer drives the motor to work through the air source, so as to realize the tightening and welding action. The biggest difference between the pneumatic packer and the electric packer is the difference of the driving source.
Site: due to different driving sources, the use site of the baler is also different. The electric baler is not limited by the site and can be moved at will. The battery can be replaced at any time. The pneumatic baler is restricted by the air pipe and can only be fixed in a certain space and can not be moved at will. Let's take a simple example: the electric packer is equivalent to a mobile phone, while the pneumatic packer is equivalent to a cable phone.
Operation: pneumatic baler on the market is generally 2-key operation, one key tightening, one key welding cut-off, tension need users to inform their own experience to operate, electric baler has 2-key operation and 1-key operation, tightening force is controlled by the circuit board, to ensure that you, every packaging belt tension, welding effect is the same.
Safety performance: as the state explicitly forbids the live operation of the baler, the electric baler is charged by the lithium battery, and the pneumatic baler provides the air source through the air pipe, which is safe.
In terms of service life: due to the influence of gas source, it is inevitable that there will be water and oil in the gas source, so the failure rate is relatively high. Generally, it takes about one year. The domestic electric baler takes 2-3 years and the imported electric baler takes 6-8 years.