Automatic packer is the highest degree of automation, the highest efficiency of the packer packaging equipment, the machine can be used with automatic conveyor line, can achieve unmanned conveying, tightening, bonding, cutting belt. The full-automatic packer uses the brand packer technology, and is now designed as a whole machine dual circuit control, which is more stable and reliable than the previous single circuit control performance. The dual circuit control reduces the internal load of the machine electric board, and the operation between each circuit of the packer structure is more smooth and stable.
The working principle of the packer is to complete the packing by tensioning, hot melting, cutting and bonding. Professional packer factory produces a wide range of applications, regardless of the size of the packaging, you can pack without adjusting the machine. The packaging packer is a mechanical structure, some of which use imported packer parts, the back blade is stable and reliable, the adjustment is convenient, and the price of the packer is reasonable.
The packing object is basically in the middle of the packer. First, the right top body rises, presses the front end of the packing belt, and tightens the packing belt on the object. Then, the left top body rises, presses the proper position of the lower belt. The heating plate extends into the middle of the two belts, the middle top knife rises, cuts off the belt, and finally sends the next belt to the position to complete a working cycle. Baling machine is a kind of machine that uses baling tape to wrap products or packages, then tighten and connect the two ends through thermal effect melting or using buckle and other materials. The function of the automatic packer is to make the plastic belt cling to the surface of the strapped package, so as to ensure that the package will not be scattered due to loose strapping during transportation and storage, and at the same time, the strapping should be neat and beautiful.