1、 Precautions for daily use:
1. The first three to five times of a new battery should be recharged for 12 hours after the battery has cooled down. After the first three to five times of repeated charge and discharge, the battery can play its normal maximum power.
2. The different voltage changes in different regions will affect the charging time. If the temperature of battery or charger is too high, the charging efficiency will be reduced and the battery will not be fully charged. Therefore, it is recommended that customers should charge in the environment of 10 ~ 40 degrees, and install a regulated power supply before the charger.
3. In order to avoid battery short circuit, do not store with metal objects. It is also forbidden to conduct the positive and negative electrodes of the battery in any way. Do not open the battery shell to keep the battery dry.
4. If the machine is out of service for a long time, please remove the battery of the baler to extend the battery life of the baler.
5. When the machine is not in use, please remove the battery of the packer to avoid the rapid loss of power. If the battery is fully charged, after about 1-2 months, the power will be completely lost naturally. In order to prolong the battery life of the packer, please install the removed battery on the machine, use up the remaining power, and make sure that the battery power is used up (red light is on), then go to charge.
The battery of the portable baler has always been the weakness of the baler. How to make the battery last longer is also a problem we have been thinking about. However, as long as we use it properly and pay attention to maintenance, we can maximize the normal effect!