Whether the packaging machine is of high quality determines the packaging efficiency of the product, and the choice of the packer is also crucial. The creative power small knitting helps you eliminate the common faults of the packing machine, so that you can buy the high-quality plastic steel belt packing machine suitable for the product.
1. Improper adjustment of tightening force
There are two reasons for this situation in the packer, one is that the tightening force is too large, mainly manifested in the packing belt of the packer deeply trapped in the carton, which will pull the packing articles bad; the other is that the binding force is too small, and its expression is that the packing belt is tight and unable to play the binding role, leading to the product scattered and damaged the product.
2. Poor adhesion
Bad bonding effect does not completely mean that the packer has a failure, or it may be that the quality of the packing belt itself is not good, which will also result in this result. However, if this situation is excluded, it may be that there is a problem with the perm of the packaging machine, either the two layers of the packing belt are scalded due to the excessive temperature adjustment, or the perm temperature is too low, and the packing belt is not fully ironed.
3. The cutting effect is not good
A perfect packaging process should be good tape cutting and good adhesion, but if the packer is used too long or wear seriously, it will appear bad condition of the strip cutting, which seriously affects the packaging effect and reduces the aesthetic degree of the packaging products.