Check whether the oil pipes are leaking
Check whether the link shaft pin of each part is reliable
Run the machine with no load and check whether the sound of the hydraulic baler is normal
Check whether the hydraulic oil temperature, pressure, liquid level, and electrical of the equipment are normal
Suggestion: Hang up the machine inspection record registration form at a conspicuous position of the machine, so that the workers can do the maintenance work of the machine
Perform a detailed inspection of the machine once a month:
Check the condition of the hydraulic oil of the machine. If the hydraulic oil is found to be thick or black, replace the hydraulic oil and clean the oil tank filter in time
The fuel tank filter can be cleaned with gasoline or diesel. After cleaning, the filter must be dried or wiped dry with an air compressor before it can be reinstalled.
Check whether the parts are loose or leaking.
Please use the screw wrench of the corresponding model to tighten the screws of each component. If you find oil leakage in a certain part of the machine, please take a photo or video and contact our after-sales team. Without the guidance of technicians, please do not adjust the pressure of the machine or disassemble the parts of the machine for maintenance.
Check whether the wiring ports in the electrical box are loose.