Comprehensive maintenance of the baler:
Clean the baler once a month. Since the baler is mainly composed of mechanical parts, it is inevitable that a large amount of dust will enter during use. It gets more and more every day and needs to be cleaned up. Otherwise, the damage of machine parts will be accelerated. Therefore, regular cleaning is essential. First, remove the four screws on the left black side cover and remove the side cover. Then remove the four screws on the panel side cover and put the panel side cover back in place. You'll see that there are two wires attached to the side cover of the panel. Once it goes up and down, first remove the upper line. When removed, the panel side cover can be fully withdrawn.